Blur Vibration Simulator TSS Series

TSS series blur simulator realizes human hands blur or natural / artificial vibration for development of image stabilization function for high definition and high magnification cameras such as single-lens reflex cameras, mirror-less system cameras, cam-coders, mobile terminals and CCTV cameras. Recently, the IS function will be essential for HD cameras and telephoto lens, especially free curve vibration simulation is necessary for high-end cameras.

High performance Pitch/Yaw/Roll motion		Easy-to-use software
		(Click enlarge the picture)
High response, high precision, high resolution motion is realized by high performance servo motors. All axes are synchronized together.		The data transfer program ?Data Loader? easily realizes many kinds of waveform transmission such as free curve wave, sine wave, composed sine wave, amplitude modulation wave and frequency modulation wave. The waveform maximum length is up to 60 seconds, and any timing trigger out put is available for detailed blur analysis.
Touch panel operational controller		Optional parts
The controller has touch panel operation for easy-to-use. There are three operation modes, wave motion, positioning and jog motion. In the wave motion mode, sine wave motion could be operated without computer and complex free curve motion data is transferred by software. The trigger output function helps non statistics blur reduction analysis to correct images in the same vibration state.		Hardware option) There are two optional camera mounting plates one is yawing center version and another is XY adjustable type. Also mounting base of the vibration table is available. Software option) The data transfer Dynamic Link Library (DLL) is available to integrate customized analysis software.

Specifications

Model Number		TSS-1000
Axis		?X,?Y (M1? M3 synchronization)
		?Z (Direct drive motor)
Positioning	Minimum command unit	0.00001deg (? 0.175?rad ?? 0.036arcsec)
Sine curve drive	Frequency	0.1 deg. ? 1 deg., 0.1 deg. Increments (Below +/- 0.5 degree when the frequency is greater than 5Hz)
	Amplitude	0.1 deg. ? 1 deg., 0.1 deg. Increments (Below+ /- 0.5 degree when the frequency is greater than 5Hz)
	Driving times	Only an infinite continuous operation
Free curve drive	Data length	Below 60 sec
	Minimum command unit	0.00001deg
	Minimum time unit	2ms
	Driving times	Times for continuous operation can be set. (1 ? 9999 or an infinite)
	Wave limit (Angle)	?x??y: ?1deg ?z: ?31deg
	Wave limit (Acceleration and deceleration)	Below the acceleration and deceleration for the driving with 10Hz, +/- 0.5 deg.
Temperature in use		0? - 40?
Humidity in use		20% - 80% (Non condensing)
Maximum load capacity		19.6N(2kgf)
Weight		27.3Kg (Without the controller)

Controller

Model Number		TSS-1000
Power		AC100V 50Hz/60Hz
Power Consumption		700VA(Normal Operation)
Trigger Signal (1 & 2)	Output Method	Transistor: Open-collector: Sink Output
	Output Voltage	DC24V
	Output Drive Current	100mA(Maximum)
	Output Connector	BNC
Trigger 1 signal period		Below 10000 ms, 2ms increments (Odd numbers setting not allowed)
Trigger 2 signal period		Can be output at any time
Communication	Terminal, Speed	Ethernet,?100Mbps
Weight		20Kg (without stage)