CONNECTOR LOCK SERIES FOR RAPID RECHARGER

Features

LE-468

• Prevents mischief to EV connector during charging or when not in use.
• Can be used with a CHAdeMO connector.
  *Cannot be used with some connectors. Contact us for details.
• 3 types available: with key (CP-468-1), with solenoid (LE-468), and holder only (CP-468-2).
• Open bottom on connector pocket prevents dust and dirt from collecting.
• Can be easily installed from rear with four M6 screws.
• Can also be used combined with CP-468-P-1 to prevent recharging connector terminal from getting wet (equivalent to IPX4).
• Connector lock/unlock can be controlled with received electric signal from main rapid recharger unit.
• Indicator for quickly checking whether locked/unlocked.
  Solenoid specifications (energized unlocked)
  Rated voltage: DC24V
  Rated current: 104mA
  Energization rate: 100%
  Ambient temperature: -5?C to +50?C
  (no freezing)
  LED specifications
  Rated current: 17mA
  Built-in resistor
  SW1, SW2 specification
  Rated voltage: DC30V/3A (resistance load)
  (Minimum resistance load DC5V/160mA)

CP-468

• Prevents mischief to EV connector during charging or when not in use.
• Can be used with a CHAdeMO connector.
  *Cannot be used with some connectors. Contact us for details.
• 3 types available: with key (CP-468-1), with solenoid (LE-468), and holder only (CP-468-2).
• Open bottom on connector pocket prevents dust and dirt from collecting.
• Can be easily installed from rear with four M6 screws.
• Can also be used combined with CP-468-P-1 to prevent recharging connector terminal from getting wet (equivalent to IPX4).
• Lock uses reversible key with dustproof shutter. Key can be removed at two positions, allowing lock to remain unlocked.
• By special order, key specifications can be changed for key differences or customer-specified number. Consult with TAKIGEN.
• Indicator for quickly checking whether locked/unlocked.
• By special order, a connector detection switch can be set.
• Simple structure which simply holds connector.
• Installation dimensions same with other types, allowing replacement with key- or solenoid-operated types according to use.