HOME / Takigen / RECHARGER FITTINGS / CONNECTOR LOCK SERIES FOR RAPID RECHARGER
CONNECTOR LOCK SERIES FOR RAPID RECHARGER

CONNECTOR LOCK SERIES FOR RAPID RECHARGER

BRAND : Takigen | PRODUCT CODE : CP-468

Features

    LE-468
    • Prevents mischief to EV connector during charging or when not in use.
    • Can be used with a CHAdeMO connector.
      *Cannot be used with some connectors. Contact us for details.
    • 3 types available: with key (CP-468-1), with solenoid (LE-468), and holder only (CP-468-2).
    • Open bottom on connector pocket prevents dust and dirt from collecting.
    • Can be easily installed from rear with four M6 screws.
    • Can also be used combined with CP-468-P-1 to prevent recharging connector terminal from getting wet (equivalent to IPX4).
    • Connector lock/unlock can be controlled with received electric signal from main rapid recharger unit.
    • Indicator for quickly checking whether locked/unlocked.
      Solenoid specifications (energized unlocked)
      Rated voltage: DC24V
      Rated current: 104mA
      Energization rate: 100%
      Ambient temperature: -5?C to +50?C
      (no freezing)
      LED specifications
      Rated current: 17mA
      Built-in resistor
      SW1, SW2 specification
      Rated voltage: DC30V/3A (resistance load)
      (Minimum resistance load DC5V/160mA)

    CP-468
    • Prevents mischief to EV connector during charging or when not in use.
    • Can be used with a CHAdeMO connector.
      *Cannot be used with some connectors. Contact us for details.
    • 3 types available: with key (CP-468-1), with solenoid (LE-468), and holder only (CP-468-2).
    • Open bottom on connector pocket prevents dust and dirt from collecting.
    • Can be easily installed from rear with four M6 screws.
    • Can also be used combined with CP-468-P-1 to prevent recharging connector terminal from getting wet (equivalent to IPX4).
    • Lock uses reversible key with dustproof shutter. Key can be removed at two positions, allowing lock to remain unlocked.
    • By special order, key specifications can be changed for key differences or customer-specified number. Consult with TAKIGEN.
    • Indicator for quickly checking whether locked/unlocked.
    • By special order, a connector detection switch can be set.
    • Simple structure which simply holds connector.
    • Installation dimensions same with other types, allowing replacement with key- or solenoid-operated types according to use.

Specifications

    • Material: Case: Resin (PBT/PC)
      Mechanical parts: SUS304
    • Finish: Coated (black)

Specific Use

    • Connector lock for rapid recharger

Remarks

    • Be sure to test adequately when using a solvent such as thread-locking fluid.

Movie


Related Products